Summer alignment special at Arvids!

[John Hartman]

4 wheel alignment, regularly $89.95, for the summer of '10, $74.95

Really good deal, we have an excellent machine, no wires, very prescise, and we know how to use it.  We are not on flat rate either, so we can do a proper job and not be forced to "beat" a time.

If you book for mon-friday, I can do the work on your car myself if you want me to.  Saturdays it will be someone else, but they have been working with that machine longer than me.

If you have custom specs you want, just be sure that is what you want, write it down and bring it in and we/I will do our best to achieve those specs for you.  Of course, within the limits of the adjustment hardware on the car.

not just DSMs/Colts/Galants/Evos either, if you are a member, you are welcome at this price.

And good freinds too, no problem, but you do have to be acually affiliated with BCDSM.  My boss is doing this for me because I asked and wanted to pass some deals on to the club.

some things might be extra, such as if something is really seized and we spend way more time than normal on it.  Still within reason tho, that part is not there to hose people, its just to keep things real as it were.

Arvids automotive, Garden St, Abbotsford, BC.  Jim is the owner, or Kieth, the service writer.  604-850-6649

[John Hartman]

ok folks, only a few more days left in June!!  This is a good deal, take advantage of it while its on!

[Kristopher Rozon]

It's nice to know a shop will entertain custom alignment specs. So many shops won't do this, and their targets are so damn vague within mfr specs that a proper alignment on a Dodge Ram 4x4 is still crap with the large tolerances they allow.

Wish I had a few bucks to align the Quattro but it also needs a control arm bushing and I'm just not prepared to rip into it yet.

[John Hartman]

at least you know to do those first   

We can take care of that for you too if you don't have the time btw.

[Remi Raymond]

I'll be by to see you at some point, but like Kris I'm replacing bushings/ball joints soon, so really no point yet.
Still waiting on some of those M parts to come in too.

[John Hartman]

gonna hold this over for the summer.

Ryan is a currently happy customer with his done.

Marke Baileys Talon was also done too, a while ago.

As well all 4 of my current cars and one of my other ones.

[Mark Guthrie]

just about finished replacing some of my front end parts, i have a couple small things left to do and ill bring it by and have it done

[John Hartman]

cool, make an appointment and ask for me, if you want me to do it.

Have all appropriate parts replaced, and if you can, free up the rear adjustments for toe and camber.  That can save you lots of money and make sure I can get it as close to spec as possible.  you have access to a hoist and heat/penetrating oil, so get it done    Hit the front tie rods too so I know I can spend as much time on actually adjusting it as possible.

For people who can't do this, its ok, but for Marks high mileage car, and he has access to a shop, this will be a good idea.

Also, if you have adjustable ride height, make sure its where you want it or you will have to do it again after.  Even a wee bit of height change can affect toe a great deal and toe is the angle that wears tires.