British Columbia DSM

GVRD - BC DSM Club => Picture Gallery => Topic started by: Jeff Armstrong on June 08, 2003, 11:14:32 am

Title: BC DSM Engine bays...
Post by: Jeff Armstrong on June 08, 2003, 11:14:32 am: I have no image right now but it's my post/thread so :moon:
Title: BC DSM Engine bays...
Post by: Andrew Steele on June 08, 2003, 11:29:36 am: (http://dsm.labattz.com/My%20Avatars/94EngBayFrnt-m.jpg)
Title: BC DSM Engine bays...
Post by: Merlin Beerens on June 23, 2003, 12:40:10 pm: (http://blob.homestead.com/files/Cars/enginebay.JPG)
Title: My ugly engine
Post by: Chris Andrews on June 29, 2003, 12:08:44 pm: (http://www.pinktemple.com/enginebay.jpg)

Ok, its not that clean and shiney... :oops:
But it gets the job done... :twisted:
Title: BC DSM Engine bays...
Post by: Zak Mach on July 16, 2003, 09:19:36 pm: (http://www3.telus.net/ysamach/pics/eclipseengin.jpg)
Title: different host
Post by: Wayne Barbaza on September 02, 2003, 07:58:36 pm: (http://www3.telus.net/barbaza/DSM/DSCF0014.JPG)
Title: BC DSM Engine bays...
Post by: Ernie Turner on October 07, 2003, 01:01:21 pm: (http://www.imagestation.com/picture/sraid83/pa5a4195a0c2ad0c0ec0f3df342fff7bc/fae2ae34.jpg)
Title: BC DSM Engine bays...
Post by: Robin Toor on October 16, 2003, 03:50:50 pm: new ones :D

(http://www.imagestation.com/picture/sraid84/pac23d7ae46d820b76fa19d549c1cd1b6/facea6b0.jpg)

(http://www.imagestation.com/picture/sraid84/p54f6696390d60a872cea3c8b2dd5a2ba/facea33e.jpg)

(http://www.imagestation.com/picture/sraid84/p08effe8fc427f877c01b1edc81767b19/face97d5.jpg)
Title: BC DSM Engine bays...
Post by: Andrew Scott on November 13, 2003, 11:06:21 pm: again, after FMIC install

(http://members.shaw.ca/sliver/engine.JPG)

the orange dynomax sticker is at least +15 hp

and as you can see, kinetic has made a fortune off of me with couplers ;)
Title: BC DSM Engine bays...
Post by: Scott Girvin on November 19, 2003, 06:21:21 pm: Here's a few of mine.......EDIT...UPDATED :D

(http://www.imagestation.com/picture/sraid116/pcba9b2079f74dcffd537fefec0e09dcb/f8afaad7.jpg)

(http://www.imagestation.com/picture/sraid116/p18a0822694aacf152eeaf4cd9c617625/f8afaad2.jpg)

(http://www.imagestation.com/picture/sraid116/pa8fc047f3326f3783e1eb2f206322249/f8afaada.jpg)
Title: BC DSM Engine bays...
Post by: Andrew Scott on January 05, 2004, 11:18:10 pm: Here's some new pics after a maf-t install and some cleanup work

(http://members.shaw.ca/sliver/maft/DSCF0049.JPG)

(http://members.shaw.ca/sliver/maft/DSCF0050.JPG)
Title: BC DSM Engine bays...
Post by: Tim Hunt on January 30, 2004, 12:02:23 am: (http://doghouse.gotdns.org/albums/DSM20031005/HPIM0933.jpg)
(http://doghouse.gotdns.org/albums/DSM20031005/HPIM0935.jpg)
Pictures of the car right after the 6-Bolt install with the EVO16G in place as well, if you look close you can also see the SS Kinetic J-pipe in place
Title: BC DSM Engine bays...
Post by: Michael Cummings on February 15, 2004, 03:30:25 pm: (http://images.fotopic.net/?id=2840433&outx=600&oq=0)

hopefully the picture worked out..gettin tired of not havin an engine bay pic up on here so here it is (if it worked).
Bling plans for spring/summer are chrome 2.5' uicp, chrome 3' intake pipe, and chrome upper and lower heat shields, I have my heat shields off in the pic cause i'm gettin them chromed soon.
Should be nice and shiny once all the chrome is in there.
Title: BC DSM Engine bays...
Post by: Patrick Chua on March 21, 2004, 06:52:37 pm: here is one I quickly snapped today... I think I really need to spray paint that area around the rad

(http://img.villagephotos.com/p/2003-12/570680/IMG_0286.JPG)
Title: BC DSM Engine bays...
Post by: Artem Goloubov on April 06, 2004, 09:00:56 pm: :D

(http://pacificcoast.net/~artemka/dsm3s.jpg)

(http://pacificcoast.net/~artemka/dsm4s.jpg)
Title: BC DSM Engine bays...
Post by: Jeremy Clarke on May 06, 2004, 10:26:25 pm: I finally got a decent pic of my bay this past meet.
(http://members.shaw.ca/jandaclarke/Island%20Meet%20May2-04%20pic-2.JPG)
Title: BC DSM Engine bays...
Post by: Dan Harshey on May 18, 2004, 06:11:56 pm: Did everything you see here today, painted all brackets along the fire wall, battery tie down, timing belt cover, upper heat shield, headlight mounting brackets, rad support brackets, sanded off ugly red paint on Valve Cover.

(http://www.imagestation.com/picture/sraid117/p6471463864d882f9e4f886e5a7af029e/f89f36fd.jpg)

(http://www.imagestation.com/picture/sraid117/pfc9a99fac80fcd613342b77bdfd2cc4d/f89f3701.jpg)

will paint the Valve Cover sometime in the future, as well as get a new UICP
Title: BC DSM Engine bays...
Post by: Michael Cummings on May 27, 2004, 08:46:21 pm: These are my most recent engine bay pics, its slowly coming along. I'll post another one after I paint my throttlebody, intake manifold, chrome my heat shields and get my new mounts in.

(http://images.fotopic.net/?id=4591096&outx=600&oq=0)
(http://images.fotopic.net/?id=4591100&outx=600&oq=0)
(http://images.fotopic.net/?id=4591103&outx=600&oq=0)[/url]
Title: BC DSM Engine bays...
Post by: John Hartman on May 30, 2004, 09:49:15 pm: hey, well, here is mine, its not perfect by any means, but here it is. No digital optimizations, just the way it looks

(http://members.shaw.ca/JohnHartman/May04Enginebay.jpg)
Title: BC DSM Engine bays...
Post by: Fraser Cassells on September 29, 2004, 06:56:09 pm: Step 8 of 10... come to grips with your obsession

(http://mypage.uniserve.ca/~fcass/New%20013%20(Large).jpg)
Title: BC DSM Engine bays...
Post by: Chris Andrews on October 21, 2004, 05:53:08 pm: Step 12. Disillusionment. Accept what you have. Seek a licenced therapist to help you cope with the reality that all the money you spent and your emotional connection to your DSM is highly illogical. Or stupid. Or crazy. Group hug.............
(http://www.pinktemple.com/engine.jpg)
She ain't pretty, but she drives nice....... :P
Title: BC DSM Engine bays...
Post by: Jeremy Clarke on November 12, 2004, 07:24:15 pm: Here's a new one of mine with the EVO, 2GMAS, and some new hoses

(http://images.fotopic.net/y5hzg0.jpg)
Title: BC DSM Engine bays...
Post by: Rob czep on January 22, 2005, 08:37:53 pm: http://www.rmtmods.ca/custom/turbo/engine/engine_left_b2.jpg
(http://)
http://www.rmtmods.ca/custom/turbo/engine/engine_right_b2.jpg

This is somthin we just finished up.
Title: 92 Talon AWD TSI 2.3 Stroker
Post by: Steve Yadernuk on February 05, 2005, 08:01:54 pm: (http://www.dsmtuners.com/gallery/data/501/45440IMGA1097-med.JPG)

here it is all finished!! :D
Title: BC DSM Engine bays...
Post by: Michael Cummings on February 23, 2005, 02:31:10 pm: My updated engine bay

http://engine.fotopic.net/p12124987.html
Title: BC DSM Engine bays...
Post by: Mike Meron on April 06, 2005, 10:07:51 pm: step 13
once you have taken councelling for step 11 and 12
fall off the wagon and do it in style.
(http://bcdsm.labattz.com/PICS/Mike_Meron/DCP01383.JPG)

DUDE WHERES YOUR MAS/MAF???

(http://bcdsm.labattz.com/PICS/Mike_Meron/DCP01382.JPG)
Title: BC DSM Engine bays...
Post by: Ricky Lim on April 06, 2005, 10:27:27 pm: (http://x4.putfile.com/6/15123562262.jpg)
Title: BC DSM Engine bays...
Post by: Clayton Ulmer on April 06, 2005, 11:20:14 pm: Mike, nice looking engine bay! Very clean and no needles from the trees! Nice touch with the coolent overflow bottle.
You still have never taken me for a ride since you started creating this beast.
Title: Cam's Engine Bay
Post by: Cameron Hatfull on June 01, 2005, 07:55:09 pm: (http://C:\Documents and Settings\Dsm Racing\My Documents\My Pictures\Talon Pics\April 2005)
Title: Damnet
Post by: Cameron Hatfull on June 01, 2005, 07:56:28 pm: (http://www.cardomain.com/member_pages/show_image.pl?)
Title: BC DSM Engine bays...
Post by: Rob czep on June 12, 2005, 07:24:04 pm: Heres the new set up half done.

(http://[img]http://img.photobucket.com/albums/v161/ledczep/000_0516.jpg)[/img][/url]
Title: BC DSM Engine bays...
Post by: Mitch Delmer on June 12, 2005, 11:00:41 pm: ok here are some of my new setup too...
(http://images5.theimagehosting.com/DSCF1400.JPG)
and the little guy...
(http://images5.theimagehosting.com/DSCF1404.JPG)
and a couple of sidemounts...
(http://images5.theimagehosting.com/DSCF1430.JPG)
Title: BC DSM Engine bays...
Post by: Danny Bouliane on June 27, 2005, 01:08:24 pm: Ok finally a better engine bay shot..
(http://i7.photobucket.com/albums/y294/dbouliane/enginebay.jpg)
Title: BC DSM Engine bays...
Post by: Miles Frederick on July 13, 2005, 10:01:51 pm: (http://www.smilocomp.ca/images/enginebay.jpg)
Title: BC DSM Engine bays...
Post by: Ryan Slater on July 17, 2005, 09:26:45 pm: (http://www.imagestation.com/picture/sraid177/p47335316a4648cd11ea188c59af801f7/f33e4c81.jpg)
Title: BC DSM Engine bays...
Post by: Andrew Steele on September 13, 2005, 12:27:13 am: I don't believe MSN allows external image linking
Title: BC DSM Engine bays...
Post by: Kenji Scott on October 26, 2005, 09:02:09 pm: (http://www3.telus.net/public/sl600/gvr4engine.JPG)
Stock for the most part
Title: BC DSM Engine bays...
Post by: trevor_Shiggs on January 21, 2006, 01:16:09 pm: (http://img499.imageshack.us/img499/160/talonengine27bw.jpg)
Title: BC DSM Engine bays...
Post by: Wayne Wright on January 21, 2006, 08:17:54 pm: (http://x4.putfile.com/1/2022124968.jpg)

That's gutting the Laser right before it got scrapped. And no, I'm not turbo'd, and I'm not dumping atmospherically.

Ever wonder how big a 1g DSM wiring harness is?

(http://x4.putfile.com/1/2022214032.jpg)

It stretched out much longer, but I couldn't get it to fit in one pic at a good angle. That's every wire, nothing was cut....I still have that by the way for any colt projects or anything.... :laugh:

Anyays, car comes off the road in 6 days, then about 3 weeks after that hopefully I'll have some engine bay pics of the talon as well.
Title: BC DSM Engine bays...
Post by: Andrew Scott on January 21, 2006, 08:21:59 pm: Miles: Duct tape??
Title: BC DSM Engine bays...
Post by: Miles Frederick on February 15, 2006, 06:05:49 pm: Quote
Miles: Duct tape??

Lol, A makeshift heat shield. The coupler was getting a little warm.
Title: BC DSM Engine bays...
Post by: Wayne Wright on February 15, 2006, 06:17:07 pm: No I didn't get a chance to weigh it Ron, It's sitting in a shed in my back yard though, maybe if I get a scale I'll weigh it.
Title: BC DSM Engine bays...
Post by: Brian Doyon on June 27, 2006, 08:12:35 am: Im still the only one with my hyundai engine, booyah ! Lol
Title: BC DSM Engine bays...
Post by: Jared Grant on July 18, 2006, 01:05:35 am: hey just wondering what the small filter on the left side of the valve cover is?
Title: BC DSM Engine bays...
Post by: Jeetinder Ghataurah on July 18, 2006, 06:30:59 pm: Quote from: "jared mike"
hey just wondering what the small filter on the left side of the valve cover is?

That's a Filter for the Valve cover, some people use oil catch cans others just put a filter in the stock line, another way is to just put a filter on and ditch the line. That's what I did, I use the little K&N Filter
Title: BC DSM Engine bays...
Post by: Graeme H Burvill on September 27, 2006, 09:29:48 pm: Hey, where do you get the custom "BCDSM" spark plug cover?
and where can i get one?....or can I?

noob btw
Title: BC DSM Engine bays...
Post by: Kenji Scott on September 27, 2006, 11:03:49 pm: Graeme you missed one for sale in parts store by a week or so..

http://www.labattz.com/phpBB2/viewtopic.php?t=15476

they come up for sale every so often if you keep your eyes peeled, someone was making these a long time ago and there was a group buy type of thing, maybe if you make a big fuss you can motivate ppl to start another one :P

As for my engine bay....

(http://i52.photobucket.com/albums/g10/corruptrodent/RIMG0081.jpg)

Sneak preview of my not-very-exciting new setup..
Title: BC DSM Engine bays...
Post by: Graeme H Burvill on September 28, 2006, 09:10:32 am: LOl thanks alot man, maybe i will try and start a fuss. Mine like crumbled away lol. I'll post my engine bay when i figure these forums out......thas right im a noob...lol

thanks man....btw how much do they go for?
Title: BC DSM Engine bays...
Post by: Jeetinder Ghataurah on September 28, 2006, 03:51:15 pm: Ususally around $100
Title: BC DSM Engine bays...
Post by: Graeme H Burvill on September 28, 2006, 05:36:35 pm: http://i64.photobucket.com/albums/h161/Slug604/Picture163.jpg

bout as stock as she gets
Title: BC DSM Engine bays...
Post by: Matt Demick on September 28, 2006, 07:32:14 pm: Nice dirrect pipe route there Kenji :laugh:
Title: BC DSM Engine bays...
Post by: Graeme H Burvill on September 28, 2006, 07:37:26 pm: is it just me or is my sig pic too big?
Title: BC DSM Engine bays...
Post by: Jared Grant on September 28, 2006, 09:53:55 pm: its big
Title: BC DSM Engine bays...
Post by: Graeme H Burvill on September 30, 2006, 09:28:24 pm: (http://i64.photobucket.com/albums/h161/Slug604/Picture163.jpg)
stock
Title: BC DSM Engine bays...
Post by: Nathan Craft on October 01, 2006, 12:10:04 pm: here's mine, it needs a good cleaning, but it sounds sweet and has all the power i need

(http://memimage.cardomain.net/member_images/4/web/2404000-2404999/2404808_42_full.jpg)
Title: BC DSM Engine bays...
Post by: Igor Kozlov on October 15, 2006, 11:21:20 pm: finally, my new engine

(http://i95.photobucket.com/albums/l156/obman88/CIMG4006.jpg)
Title: BC DSM Engine bays...
Post by: luis Barbosa on December 16, 2006, 02:58:31 pm: (http://memimage.cardomain.net/member_images/1/web/2449000-2449999/2449624_29_full.jpg)
Title: BC DSM Engine bays...
Post by: Jared Grant on December 16, 2006, 03:40:35 pm: do u still have the t25 in it?
Title: BC DSM Engine bays...
Post by: luis Barbosa on December 16, 2006, 04:28:38 pm: the stock turbo yeah.... :cry:
Title: BC DSM Engine bays...
Post by: Nathan Craft on December 18, 2006, 05:47:28 pm: here's a pic of teh new TSI. as you can tell it needs work.

(http://i131.photobucket.com/albums/p317/snuffoff/TsiEngineBay.jpg)

the oil is from starting it without teh oil cap on. :oops:
Title: BC DSM Engine bays...
Post by: luis Barbosa on January 06, 2007, 02:33:39 am: im now runnin the t28
Title: BC DSM Engine bays...
Post by: Trev_Scott on January 06, 2007, 12:43:27 pm: Here's my baby. She's still got a long way to go. My next plans are to paint the valve cover, get a huge fmic (10.5x34x3.5), get my eprom a stage 3 chip, and a GM maft setup. I'm thinking maft Gen2 with the wideband trace.

(http://i82.photobucket.com/albums/j261/the_talon_guy/Image014.jpg)

(http://i82.photobucket.com/albums/j261/the_talon_guy/Image015.jpg)

And the newest addition:
(http://i82.photobucket.com/albums/j261/the_talon_guy/Image016.jpg)

(http://i82.photobucket.com/albums/j261/the_talon_guy/Image017.jpg)

(http://i82.photobucket.com/albums/j261/the_talon_guy/DSCN0667.jpg)

UPDATE:

(http://i82.photobucket.com/albums/j261/the_talon_guy/Image054.jpg)

(http://i82.photobucket.com/albums/j261/the_talon_guy/Image053.jpg)
Title: BC DSM Engine bays...
Post by: Ryan Singh on February 12, 2007, 12:40:56 pm: Hey guys, it's not a pic of my engine bay...but it's another dsm forum that I've been frequenting for about 4 years now. It's an American site for dsmers...a lot of good people...scroll to about half way down the page, you'll see why I had to post this.

http://buschurforums.com/forum/showthread.php?t=17813&page=2&pp=10 :shock: :shock: :shock:
Title: BC DSM Engine bays...
Post by: Jared Grant on February 19, 2007, 06:19:44 pm: u see the one with the dual 50mm bov's :shock:
Title: BC DSM Engine bays...
Post by: Graeme H Burvill on September 30, 2007, 10:11:04 am: :shock:
I started to try and sort all them braided lines but got confused....;P
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on March 31, 2008, 02:21:13 pm: Heres mine, Stock except a K&N, FMIC kit, MBC, Evo mani

(http://www3.telus.net/public/bretthav/Mitsubishi/TalonAWD/finishtalonenginefront.JPG)
Title: Re: BC DSM Engine bays...
Post by: Derek Fung on May 25, 2008, 08:56:02 pm: (http://i5.photobucket.com/albums/y200/funguy604/DSC01084.jpg)
Title: Re: BC DSM Engine bays...
Post by: Mark Guthrie on June 16, 2008, 11:53:32 pm: just finished install of new valve cover, i painted the timing cover black aswell to kinda clean it up, ill take more pics tomorrow during the day for a better look. im still going to either paint the letters black or shave them and leave them polished....

(http://img.photobucket.com/albums/v669/darkmark04/I3010006.jpg)
(http://img.photobucket.com/albums/v669/darkmark04/I3010007.jpg)
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on July 07, 2008, 11:44:54 am: your oil cap is upside down ;)

heres the pics of my colts dirty as shit engine bay Mostly stock.

(http://www3.telus.net/public/bretthav/Mitsubishi/ColtPics/2008/2008enginepass.JPG)
(http://www3.telus.net/public/bretthav/Mitsubishi/ColtPics/2008/2008hoodup.JPG)

sorry shitty pics of a shitty dirty engine bay,

I have maft installed in there now in place of 1G crapperairbox
Title: Re: BC DSM Engine bays...
Post by: yan tang on April 02, 2009, 03:29:32 pm: (http://i665.photobucket.com/albums/vv15/yanctang/DSC02194.jpg)
(http://i665.photobucket.com/albums/vv15/yanctang/DSC02195.jpg)
Title: Re: BC DSM Engine bays...
Post by: Jason Harwood on April 03, 2009, 03:44:30 pm: (http://members.shaw.ca/jharwood/Eclipse/P1000395.jpg)
Title: Re: BC DSM Engine bays...
Post by: Tony Leong on August 13, 2009, 04:01:10 pm: "Before" shots August 2009:

(http://i654.photobucket.com/albums/uu267/auto28145/IMG_0644.jpg)

(http://i654.photobucket.com/albums/uu267/auto28145/IMG_0645.jpg)

(http://i654.photobucket.com/albums/uu267/auto28145/IMG_0647.jpg)

September shots after using a $4.99 bottle of Simple Green All Purpose Cleaner:

(http://i654.photobucket.com/albums/uu267/auto28145/BUSH3299Medium.jpg)

(http://i654.photobucket.com/albums/uu267/auto28145/BUSH3302Medium.jpg)

(http://i654.photobucket.com/albums/uu267/auto28145/BUSH3304Medium.jpg)
Title: Re: BC DSM Engine bays...
Post by: Zach Holt on September 07, 2009, 05:05:23 pm: realized I put pics in the wrong place. There she is.... for now ;)

new gears etc
(http://img190.imageshack.us/img190/9836/dsc01913s.jpg) (http://img190.imageshack.us/i/dsc01913s.jpg/)

Exhoust wrap! woohoo
(http://img190.imageshack.us/img190/4060/dsc01919g.jpg) (http://img190.imageshack.us/i/dsc01919g.jpg/)
Title: Re: BC DSM Engine bays...
Post by: Ivan Skare on September 08, 2009, 08:48:32 pm: Looks top notch Ron!
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on September 08, 2009, 08:52:28 pm: :o
Title: Re: BC DSM Engine bays...
Post by: J. Todd Murie on December 20, 2009, 10:13:20 pm: It's a MONSTER!
Title: Re: BC DSM Engine bays...
Post by: patrickWoo on January 28, 2010, 02:51:41 pm: (http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs177.snc3/20470_251729644189_799549189_3096650_689155_n.jpg)

Here's something different so you cannot comprehend. :P
Title: Re: BC DSM Engine bays...
Post by: DarrylDhaliwal on March 14, 2010, 01:45:01 am: My GSX (work in progress)
(http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2072/54/7/513052879/n513052879_1310645_3345.jpg)

My GST (work in progress)
(http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs495.snc3/27057_361903747879_513052879_3662476_359768_n.jpg)
(http://photos-c.ak.fbcdn.net/hphotos-ak-ash1/hs495.ash1/27057_361903757879_513052879_3662477_875829_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: daniel Dee on April 04, 2010, 07:38:19 am: Gosh!! I just realized I don't have full picture of my engine bay..
(http://i74.photobucket.com/albums/i261/wookiek7/12-07-091806.jpg)
(http://i74.photobucket.com/albums/i261/wookiek7/29-01-091919.jpg)
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on April 04, 2010, 10:23:14 pm: ......and you still dont lol
Title: Re: BC DSM Engine bays...
Post by: Tyler Saunders on April 04, 2010, 11:12:02 pm: hahaha i was thinking the same thing Brett ;)
Title: Re: BC DSM Engine bays...
Post by: Marke Bailey on April 16, 2010, 09:46:42 am: (http://i46.photobucket.com/albums/f106/Indyraman/IMG_2810.jpg)
Title: Re: BC DSM Engine bays...
Post by: Shane Sawatzki on April 16, 2010, 10:05:21 am: Wow ron... damn.. :o
Title: Re: BC DSM Engine bays...
Post by: Cole MacDonald on May 18, 2010, 10:06:25 pm: (http://vgeikq.bay.livefilestore.com/y1p4EHfNqc0s2qmp8zUptZ0qak05TeyvKayBcDH9-pbo4yKthoQnOjPpw8ZgWcmcqmf0ZhXtdNX693P8cYfiKUG0Dl0-ukJ1hVn/IMG_2000.jpg)

(http://vgeikq.bay.livefilestore.com/y1pw8WK9-dQa0zOi8ptucmmEXqiPFpaohHwp5jXDftNC-K47o99xgZ8oqDcogGalN1mgQ02RnnNKX35oPbUw1HD8dzFVhdRNLLj/IMG_1995.jpg)

(http://public.bay.livefilestore.com/y1p0ri7Q_u6D6Np-OUMGEqruryVr3jSouNqc7SLi7mO2g7oRqBWuq8Sf-jWRS0qNPif7J9Dek8pdT4c6oriV95U6w/IMG_1982.jpg)

(http://public.bay.livefilestore.com/y1pV5r6lBlAmPjV9eexIy1F9rR0pCpJ0T9VS92NPqqVcPSnrMym5FuMt2PDEZJpIZGEz_2WBu4sKPeI0zLQkvyVQQ/IMG_1986.jpg)
Title: Re: BC DSM Engine bays...
Post by: Roger Gilchrist on May 30, 2010, 03:49:43 pm: Hi just wanted to say Hi.
I have moved to BC on the Island.

(http://s256.photobucket.com/albums/hh193/v8slayer/th_TheBitchmakeravatar.jpg) (http://s256.photobucket.com/albums/hh193/v8slayer/?action=view&current=ab63b38e.pbw)

Just click me.
Title: Re: BC DSM Engine bays...
Post by: Richard Clark on May 30, 2010, 03:54:34 pm: Welcome man, Where on the Island?
Title: Re: BC DSM Engine bays...
Post by: Kristopher on May 30, 2010, 05:30:49 pm: Quote from: Roger Gilchrist on May 30, 2010, 03:49:43 pm
Hi just wanted to say Hi.
I have moved to BC on the Island.

(http://s256.photobucket.com/albums/hh193/v8slayer/th_TheBitchmakeravatar.jpg) (http://s256.photobucket.com/albums/hh193/v8slayer/?action=view&current=ab63b38e.pbw)

Just click me.

There goes the neighbourhood!
Title: Re: BC DSM Engine bays...
Post by: Roger Gilchrist on May 30, 2010, 07:24:24 pm: Quote from: Richard Clark on May 30, 2010, 03:54:34 pm
Welcome man, Where on the Island?

Nanaimo
Title: Re: BC DSM Engine bays...
Post by: Roger Gilchrist on May 30, 2010, 07:24:57 pm: Quote from: Kristopher Rozon on May 30, 2010, 05:30:49 pm
Quote from: Roger Gilchrist on May 30, 2010, 03:49:43 pm
Hi just wanted to say Hi.
I have moved to BC on the Island.

(http://s256.photobucket.com/albums/hh193/v8slayer/th_TheBitchmakeravatar.jpg) (http://s256.photobucket.com/albums/hh193/v8slayer/?action=view&current=ab63b38e.pbw)

Just click me.

There goes the neighbourhood!
HAHA look who's talking.
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on June 29, 2010, 01:29:52 pm: sweet W/A intercooler setup!
Title: Re: BC DSM Engine bays...
Post by: Tony Leong on July 22, 2010, 10:24:50 pm: Quote from: Brett Haviland on June 29, 2010, 01:29:52 pm
sweet W/A intercooler setup!

Agreed.

Welcome to BC Roger!
Title: Re: BC DSM Engine bays...
Post by: Kino Wright on August 03, 2010, 01:45:20 pm: Bllurry cell phone pix but this is how she sit right now
(http://i972.photobucket.com/albums/ae203/eviltalon/IMG00310-20100802-1806.jpg)
(http://i972.photobucket.com/albums/ae203/eviltalon/IMG00309-20100802-1802.jpg)

Just finishing up on a rebuild :)
Title: Re: BC DSM Engine bays...
Post by: Kristopher on August 03, 2010, 02:47:50 pm: Looking good, Kino. Get some better pictures then come see RG :)
Title: Re: BC DSM Engine bays...
Post by: Sheela krasnuik on August 03, 2010, 03:07:43 pm: Amazing work Kino!!

Welcome to BCDSM.
Title: Re: BC DSM Engine bays...
Post by: Kino Wright on August 03, 2010, 03:24:36 pm: Thanx guys. It will be up and running shortly and i will take some pics and videos :)
Title: Re: BC DSM Engine bays...
Post by: Paul Pigar on August 03, 2010, 05:09:40 pm: nice s13 headlight swap.
Title: Re: BC DSM Engine bays...
Post by: Zach Holt on August 04, 2010, 08:13:36 pm: sick swap. did you do that? i thought you car was a colt with that swap. 1gb hood? or modded 1ga?

shiny motor too.

welcome
Title: Re: BC DSM Engine bays...
Post by: John Hartman on August 04, 2010, 09:28:07 pm: beautiful stuff guys!!!

BCDSM is getting bigger, better and faster by the day it seems...
Title: Re: BC DSM Engine bays...
Post by: DarrylDhaliwal on August 05, 2010, 12:03:27 am: Quote from: Kino Wright on August 03, 2010, 01:45:20 pm
Bllurry cell phone pix but this is how she sit right now
(http://i972.photobucket.com/albums/ae203/eviltalon/IMG00310-20100802-1806.jpg)
(http://i972.photobucket.com/albums/ae203/eviltalon/IMG00309-20100802-1802.jpg)

Just finishing up on a rebuild :)

crazy s13 swap buddy i think it actually looks pretty good funny what a different front end will do to an image of a car
Title: Re: BC DSM Engine bays...
Post by: Kino Wright on August 05, 2010, 08:28:04 am: Wow thanx guys. Here is another cell phoen pic of the car. (it had no engine or tranny in it hence the height in the front)

(http://i972.photobucket.com/albums/ae203/eviltalon/IMG00275-20100716-1443.jpg)
Title: Re: BC DSM Engine bays...
Post by: Robert Low on August 05, 2010, 10:34:10 am: Wow! Not only is the engine bay impressive, I love the front! Are those halos? If not, I'm sure they can be switched in quite easy with those headlights. Droooool....
Title: Re: BC DSM Engine bays...
Post by: Kino Wright on August 05, 2010, 10:37:35 am: :D wow the love around here is awesome.

They are s13 silvia projectors
Title: Re: BC DSM Engine bays...
Post by: Remi Raymond on August 05, 2010, 06:14:07 pm: Have you considered removing the rear spoiler? I think it would really suit the look of the front. Mind you, I'm biased..
(http://farm4.static.flickr.com/3329/3498082206_1b79c1fcd0_z.jpg)
Title: Re: BC DSM Engine bays...
Post by: Sy Haw Wong on August 05, 2010, 07:45:50 pm: Wow. Nice. Is that a 1Gb with S13 headlights?! That looks nice. Never knew you could do that. What did you need to do to make the pieces fit?!
Title: Re: BC DSM Engine bays...
Post by: Paul Pigar on August 05, 2010, 11:45:39 pm: hmmm, i kinda wanna do s13 fronts on my 1ga. How hard r they to swap?
Title: Re: BC DSM Engine bays...
Post by: Sy Haw Wong on August 06, 2010, 12:08:48 am: You will have to do some body work. I just kinda searched it up ~

http://www.dsmtuners.com/forums/appearance-interior-exterior/359418-s13-headlights-1ga-pics.html

Maybe Kino can give some insight!?

I like the design. I may want one myself ~
Title: Re: BC DSM Engine bays...
Post by: Zach Holt on August 06, 2010, 12:32:49 am: Quote from: Paul Pigar on August 05, 2010, 11:45:39 pm
hmmm, i kinda wanna do s13 fronts on my 1ga. How hard r they to swap?

by the looks od ir wiring a couple one off mounts and a snip on the fender and a paste on the hood.
Title: Re: BC DSM Engine bays...
Post by: Kino Wright on August 06, 2010, 07:18:47 am: It looks lots harder than it is. If you use a 1gb hood it makes things lots easier. Just some headlight wiring of the headlights and some cutting of the fenders and extending the 1gb hood.
Title: Re: BC DSM Engine bays...
Post by: Maurits Vos on August 07, 2010, 09:48:09 pm: Quote from: remi raymond on August 05, 2010, 06:14:07 pm
Have you considered removing the rear spoiler? I think it would really suit the look of the front. Mind you, I'm biased..
(http://farm4.static.flickr.com/3329/3498082206_1b79c1fcd0_z.jpg)

No Remi.. No haha :D

PS. Your white pile of deuce is still sitting at Richards hahaha
Title: Re: BC DSM Engine bays...
Post by: Doug Almond on August 08, 2010, 11:43:44 am: Tony Leong sporting some of Sheela's handy work in a new valve cover and spark plug cover.
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on September 12, 2010, 07:59:21 am: after doing a bit of a wiring tuck.
Title: Re: BC DSM Engine bays...
Post by: Paul Pigar on September 12, 2010, 01:33:00 pm: jordan....2 bovs on single pipe....that's nice
Title: Re: BC DSM Engine bays...
Post by: Cole MacDonald on September 14, 2010, 07:53:29 pm: Well I finally got my engine bay tidied up after the most recent installations and the transmission replacement. The only thing left to clean up is the ghetto coolant overflow bottle once I figure out where I want to mount my new one.

(http://79suna.bay.livefilestore.com/y1p0sNmCB3ox5l97yVXy1d9HnW82-XlfXBYa49YhPbE8w_wl01Q08kYj7hDsDhKALoiz66VtASvugFnkOqOkVvY5DSkkoK1yjZ3/IMG_2472small.JPG?psid=1)
(http://79suna.bay.livefilestore.com/y1pN9aKjeTpVRLfZ8nN5hPhQl9XY4CAPIraCwfMwFhcJima5cCjHre0qyrtPkohJ5c8hxa6atPEIbcpTIEo7fxrnrS0il17zAg4/IMG_2473small.JPG?psid=1)
(http://79suna.bay.livefilestore.com/y1pmoHDU3cjbkzB2E3RIXjX42KmVmLeIAjp9LopeOSaQm77Vja7zQSJX6Qtwh_AApXRecw-N8o6EUNBfbA4JNmwX3c5F2sCm1tC/IMG_2474small.JPG?psid=1)
(http://79suna.bay.livefilestore.com/y1p4PnNQwbC5Y0e90OXmbPgezvEUmnSAK20-Vg0WA1IFP0pBqLs9KSD41vfWSp4g03e-SvzTNqr9iZOaUq4imq2t9fKpfkyklSD/IMG_2475small.JPG?psid=1)
(http://79suna.bay.livefilestore.com/y1pvZ1ZUJUfEzcaExAoXf0_ZS8Rk0rdDicliwmkdghdZ1H6jWG9Yqk0_6sLSgL6d_jmOLBSlKpCRHAid85TngxQ_YRUytI8kqiY/IMG_2476small.JPG?psid=1)
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on September 14, 2010, 08:34:19 pm: cole those pics are money .. i also have the same high performance overflow bottle
Title: Re: BC DSM Engine bays...
Post by: Chad Giffen on September 14, 2010, 08:41:38 pm: Quote
i also have the same high performance overflow bottle

Indeed, Daniel. Ribbed to induce turbulance and cut the drag. ;D
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on September 14, 2010, 09:35:23 pm: chad is it ok if i ask you a personal question?
Title: Re: BC DSM Engine bays...
Post by: Chad Giffen on September 14, 2010, 09:38:13 pm: uh ok?
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on September 14, 2010, 09:42:14 pm: whos your favorite jonas brother ?
Title: Re: BC DSM Engine bays...
Post by: John Hartman on September 15, 2010, 10:09:54 pm: LOL. oh man, I almost hurt myself laughing at that.

And, no, hes over them, hes onto Justin Beiber now :D
Title: Re: BC DSM Engine bays...
Post by: Chad Giffen on September 15, 2010, 10:17:57 pm: lol. took me a bit to get that one actually. I don't know who the Jonas brothers are. I can see how I left myself open for that one. lol.
Title: Re: BC DSM Engine bays...
Post by: Nathan Craft on October 18, 2010, 08:03:40 pm: had some fun today :)

(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs786.snc4/66607_483260545070_562315070_7461483_6072500_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Constantin Morosan on October 19, 2010, 06:01:56 pm: lol soooo whats one man power = in horse power ?
Title: Re: BC DSM Engine bays...
Post by: John Hartman on October 19, 2010, 09:26:39 pm: depends on the man of course!!

Nathan, he had army training, so probably more than most.
Title: Re: BC DSM Engine bays...
Post by: Richard Clark on October 28, 2010, 10:20:31 am: lovin the engine bay pics there dan.
Title: Re: BC DSM Engine bays...
Post by: kevin derhouson on October 28, 2010, 03:07:24 pm: and here is dick clark showing a fine example of sarcasm.
Title: Re: BC DSM Engine bays...
Post by: Dan Newman on October 31, 2010, 09:19:10 pm: I'm happy to see your appreciating the effort richard.
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on November 12, 2010, 04:35:17 pm: current setup (http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs459.ash2/73276_10150336672670193_673250192_15890882_4449182_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on November 20, 2010, 10:29:42 pm: (http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs189.snc1/6336_138811750140_596280140_3589678_2374001_n.jpg)
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs169.snc1/6336_138811765140_596280140_3589680_4338368_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on November 29, 2010, 12:07:27 am: get her running good yet?
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on November 29, 2010, 01:43:20 am: Quote from: Brett Haviland on November 29, 2010, 12:07:27 am
get her running good yet?
ya it funs good now but not perfect
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on November 29, 2010, 08:22:45 am: Quote from: Brett Haviland on November 29, 2010, 12:07:27 am
get her running good yet?

If this was towards me. nope
Title: Re: BC DSM Engine bays...
Post by: andrew volcz on November 29, 2010, 03:54:12 pm: customers MKIV Supra (take earlier today)

http://www.facebook.com/profile.php?id=100000606952507#!/album.php?aid=34034&id=100000606952507 (http://www.facebook.com/profile.php?id=100000606952507#!/album.php?aid=34034&id=100000606952507)

(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1216.snc4/156798_170093673020863_100000606952507_406234_1255007_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Shane Sawatzki on November 29, 2010, 10:15:00 pm: that supra is slow and has a little turbo ;D

edit/ dont mind my jelous rage >:(
Title: Re: BC DSM Engine bays...
Post by: Dan Silburn on November 29, 2010, 10:49:16 pm: Just the intake pipe on that.....
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on November 30, 2010, 05:47:11 pm: (http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1153.snc4/149574_501394135140_596280140_7444810_8040165_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on January 08, 2011, 10:09:13 pm: (http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs734.ash1/162841_10150107748230141_596280140_7778854_479271_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on January 08, 2011, 10:12:08 pm: cool!! black heat wrap!! that pipe stuck out like a sore thumb!! (would a sore thump really stick out that much, i dont think so)

nice job... now get out a toothbrush and clean the rest of that biotch up!!
Title: Re: BC DSM Engine bays...
Post by: John Hartman on January 08, 2011, 10:24:51 pm: and recirc your bov, the pipe is right there, hell you had to fab up a plug for it :D
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on January 08, 2011, 10:49:28 pm: Quote from: John Hartman on January 08, 2011, 10:24:51 pm
and recirc your bov, the pipe is right there, hell you had to fab up a plug for it :D
cant find an recirc adapter it seems to do ok and its louder what the benefit of recirculaing it
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on January 08, 2011, 10:52:45 pm: Quote from: Brett Haviland on January 08, 2011, 10:12:08 pm
cool!! black heat wrap!! that pipe stuck out like a sore thumb!! (would a sore thump really stick out that much, i dont think so)

nice job... now get out a toothbrush and clean the rest of that biotch up!!
my first wrap job done 3 days ago man you feel a difference (not sure how muck but still feel it) for such little work
Title: Re: BC DSM Engine bays...
Post by: Richard Steger on January 08, 2011, 11:33:44 pm: You recirculate the blow off valve because the mass air flow sensor has already included that air in its fuel trim calculations and counts on it still being in the system, not vented to atomosphere. Therefore the fuel injected for the already measured air is too much for the actual air still in the system. Short answer... you're running pig rich whenever the blow off valve opens like during throttle lift conditions (shifting, transition from accel to brake, etc...).
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on January 08, 2011, 11:45:07 pm: yup runs rich..... but with $5000 rims and a ppppppshhhhhhhhhhhhhhh... he be pickin up ALL the ladies!
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on January 08, 2011, 11:53:23 pm: Quote from: Brett Haviland on January 08, 2011, 11:45:07 pm
yup runs rich..... but with $5000 rims and a ppppppshhhhhhhhhhhhhhh... he be pickin up ALL the ladies!
what do you think it would sound like any different?
Title: Re: BC DSM Engine bays...
Post by: kevin derhouson on January 11, 2011, 12:05:55 am: it would be a lot quieter, but we're about speed and efficiency here :p
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 11, 2011, 11:41:07 am: (http://img7.imageshack.us/img7/3713/4g63.jpg)

cleaning this thing up.
Title: Re: BC DSM Engine bays...
Post by: John Hartman on January 11, 2011, 01:21:02 pm: if you have a metal intake pipe it won't be that quiet.

When I went to speed density on my Talon, I don't need recirc any more so I saved money on the new intake pipe by not putting a recirc pipe on it. Its about the same as it was, bov noise wize. Maybe even a tad quieter if I am being fully honest. And before it was recirculated.
Title: Re: BC DSM Engine bays...
Post by: Joliesa Lepp on January 11, 2011, 02:16:54 pm: Quote from: Jordan Kruger on January 11, 2011, 11:41:07 am
(http://img7.imageshack.us/img7/3713/4g63.jpg)

cleaning this thing up.

I fricken love this engine bay.

Looks good Jordan! Thanks for taking such good care of her!
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on January 11, 2011, 02:35:05 pm: why 2 bovs?
Title: Re: BC DSM Engine bays...
Post by: Ryan Dronsfield on January 11, 2011, 02:38:09 pm: Quote from: daniel sanat on January 11, 2011, 02:35:05 pm
why 2 bovs?
I see only one
Title: Re: BC DSM Engine bays...
Post by: andrew volcz on January 11, 2011, 03:12:50 pm: Quote from: daniel sanat on January 11, 2011, 02:35:05 pm
why 2 bovs?

jordans THAT hardcore !
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 11, 2011, 03:29:25 pm: lol I probably could have got away with just replacing the original HKS bov... but i had a greddy style laying around so I threw it on. No more surge. so i never bothered removing the HKS. aside from that I am pretty jacked. lol

andrew - I just threw away 2 ladder knobs. lol
Title: Re: BC DSM Engine bays...
Post by: kevin derhouson on January 11, 2011, 04:53:36 pm: that engine bay is hot jordan, industrial looking... love it!
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 11, 2011, 06:15:59 pm: I wont put up a pic of the bottom of it yet tho. lol Im trying my best to get it back to shiny. The engine bay looked a lot nicer before with a custom sheet metal intake and nicer piping lines. Once I changed the mani to a stock ported it made my bay look plain again :(
Ill find an old pic to post..
OLD
(http://img809.imageshack.us/img809/1016/old4g63.jpg)
NEW
(http://img7.imageshack.us/img7/3713/4g63.jpg)
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on January 11, 2011, 06:52:39 pm: looks fine to me !! :)
Title: Re: BC DSM Engine bays...
Post by: Shane Sawatzki on January 11, 2011, 07:02:50 pm: Quote from: Ryan Dronsfield on January 11, 2011, 02:38:09 pm
Quote from: daniel sanat on January 11, 2011, 02:35:05 pm
why 2 bovs?
I see only one

they are directly accross from eachother on the intake pipe, greddy on the left and you can see the HKS SSQV pointing upwards just to the right of the greddy BOV.
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 11, 2011, 07:21:17 pm: im never guna live this down eh.. lol jk

Alot has changed since the old pic.
- -10 modded valve cover
- Exhaust wrapped
- Ported stock intake manifold
- modded charge pipes for new mani
- Strut tower brace
- new water res
- MLS headgasket
- Intake and exhaust gaskets
- 3G lifters
- ARP headbolts
- New mishimoto rad
- New secondary rad fan
- throttle body
- timing belt
- cam gear cover
- deleted power steering pump
- new turbosmart MBC
- 192 Tstat
- new manual trans
- ACT street disk / ACT 2600 pressure plate
- All new mounts with inserts
- New interior bits and backseats
- New garret GT3071 from kinetic
- New tune from RG
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on January 11, 2011, 09:47:32 pm: is the 325whp with the old setup or the new?
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 11, 2011, 09:57:24 pm: new, however the old had the same peak hp. but the stock mani ported offers way better mid range. Even tho the old tb was 70mm lol. the stock tb and ported mani flow similar. the sheetmetal intake with the mustang tb was just more of a lightswitch. mix that with the huge pipes and it made this thing almost unstreetable lol a lightswitch with no powersteering is an out of control go kart. lol i kinda miss the old setup, as rediculously awsome as it was. Its a shame the intake kept cracking. I re-welded it a couple times with no luck. Oh well. I get better gas mileage now and the same power with more mid.
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on January 11, 2011, 10:17:58 pm: i'm surprised what kinda numbers you'll put down with meth ? unless you already have ?
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 11, 2011, 10:26:38 pm: This thing needs meth. It already has a port infront of the tb waiting for a meth nozzle. Ive been hoping to find a kit for cheap...
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on January 12, 2011, 09:30:44 am: damn druggie cars.... pfft
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 12, 2011, 05:01:29 pm: 325whp without meth makes me curious. lol And Im still contemplating on what my purpose is for wanting water/meth. Im pretty green when it comes to meth kits. I understand how everything works but I dont know what kind of gains I would get with a really aggressive setup. Ive been told that I could max the turbo out. What kind of results would I get with a basic setup? I really dont want to push this thing too far. its just tempting.... ::)

Kinda random Q but is there any way to figure out engine hp based on whp rated on a mustang dyno? I know the results vary with the brand of dyno and drivetrain differences....
Title: Re: BC DSM Engine bays...
Post by: kevin derhouson on January 12, 2011, 06:16:02 pm: can run more timing, it ups the octane rating of your fuel, cools intake charge, cleans combustion chambers, can modestly tune with it and gain a fair bit from what i've researched.
Title: Re: BC DSM Engine bays...
Post by: John Hartman on January 12, 2011, 07:07:21 pm: you can more than modestly tune with it :)

And besides running more timing advance(and that can only go so far, too much timing does not make any more power) you can run more boost!! And more compression.
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on January 12, 2011, 08:30:55 pm: How much torque did it put down ? My 16g setup with meth and lots of boost is around the same hp wise but the trq is like 315 .
Title: Re: BC DSM Engine bays...
Post by: kevin derhouson on January 12, 2011, 08:33:48 pm: Quote from: Jordan Kruger on January 12, 2011, 05:01:29 pm
I really dont want to push this thing too far.

:p
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 12, 2011, 09:23:05 pm: 283ftlbs.

daniel - what did your car put down without meth? do you have before'n'after results?
Title: Re: BC DSM Engine bays...
Post by: daniel sanat on January 12, 2011, 09:41:55 pm: im not sure when i bought the car it only had 3" exhaust .then....
1) i went to racing greed and got meth , 16g , mbc , 2g mas , safc and turbo inlet pipe - 275awhp -24x trq
2) fmic , aem ems , converted to non mas forget the actual name , more meth/ boost -330awhp - 315trq

soon to be 3) more boost, pre-turbo meth nozzle - hoping for abit more juice
Title: Re: BC DSM Engine bays...
Post by: John Hartman on January 12, 2011, 10:27:46 pm: pre turbo allowed me to run approx 5 more psi, roughly tuned. I imagine that will really wake things up :)
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on January 13, 2011, 07:18:38 am: hrrmmmm maybe one day...
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on January 13, 2011, 08:26:51 pm: In the process of piecing a kit together. Incorporating pre-turbo nozzle. Will probably go with a hobb's switch.
Title: Re: BC DSM Engine bays...
Post by: Ryan Singh on March 13, 2011, 10:54:50 pm: Lookin' good Jordan!
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on March 14, 2011, 06:22:51 am: Thanks mang.

Im pickin up a solenoid this week and my meth setup is complete. its a simple setup but should do the job. 150cc snow performance pump - SMC accumulator - SMC solenoid - 12gph coolingmist nozzle mounted at TB - with good'ol Turbo power windshield washer fluid. Ill post pics of how i mounted everything later.
Title: Re: BC DSM Engine bays...
Post by: Carl Gould on April 04, 2011, 08:07:51 am: I have the cleanest bay of anyone here!
(http://img.photobucket.com/albums/v259/Carlz0r/IMAG0095.jpg)
Title: Re: BC DSM Engine bays...
Post by: Remi Raymond on April 04, 2011, 09:05:25 am: Quote from: Carl Gould on April 04, 2011, 08:07:51 am
I have the cleanest bay of anyone here!
(http://img.photobucket.com/albums/v259/Carlz0r/IMAG0095.jpg)

Wow nice wiring tuck.
Title: Re: BC DSM Engine bays...
Post by: Carl Gould on April 04, 2011, 11:50:48 am: Tucked it so well you can't even see the engine! In all seriousness though, I've stripped down the engine harness to the bare minimums, just have to mock it in place once I get my motor back from machining and once my shep tranny arrives. Stripping down the entire engine bay body harness as well. It's disgusting just how much of it is for the ABS system.
Title: Re: BC DSM Engine bays...
Post by: Zach Holt on April 04, 2011, 12:38:15 pm: i like how they tucked the block and the drive train too. its awesome its in the fender wells and behind the fire wall right...?
Title: Re: BC DSM Engine bays...
Post by: Carl Gould on April 04, 2011, 12:46:43 pm: Quote from: Zach Holt on April 04, 2011, 12:38:15 pm
i like how they tucked the block and the drive train too. its awesome its in the fender wells and behind the fire wall right...?
Oh definitely haha
Title: Re: BC DSM Engine bays...
Post by: John Hartman on April 04, 2011, 07:28:45 pm: major weight reduction right there!! And these cars are nose heavy from the factory so that should help the balance :)
Title: Re: BC DSM Engine bays...
Post by: Constantin Morosan on April 05, 2011, 05:58:32 pm: Carl thats just sick budy ..
Title: Re: BC DSM Engine bays...
Post by: BrandonDouglas on November 06, 2011, 11:30:29 am: (http://farm7.static.flickr.com/6240/6319031289_620f839572_b.jpg)
Title: Re: BC DSM Engine bays...
Post by: Bryan Hoytema on May 23, 2012, 04:36:24 pm: Quote from: Carl Gould on April 04, 2011, 11:50:48 am
Tucked it so well you can't even see the engine! In all seriousness though, I've stripped down the engine harness to the bare minimums, just have to mock it in place once I get my motor back from machining and once my shep tranny arrives. Stripping down the entire engine bay body harness as well. It's disgusting just how much of it is for the ABS system.

Should have taken out the suspention tho :-/ unless you were putting coilovers in there after
Title: Re: BC DSM Engine bays...
Post by: Matt LaFrance on June 06, 2012, 11:45:10 am: (http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/38070_1451715826239_178403_n.jpg)

pre-FMIC and polishing the head case letters

but she gone... just reminiscing .... sigh miss the power... will have one gain.
Title: Re: BC DSM Engine bays...
Post by: Jason Swan on June 06, 2012, 10:14:29 pm: Guess since I finally have photos I should add mine...

(http://farm8.staticflickr.com/7232/7333073846_5c7aed8442_z.jpg) (http://www.flickr.com/photos/77471294@N03/7333073846/)
P1000571 (http://www.flickr.com/photos/77471294@N03/7333073846/) by ebonyswan (http://www.flickr.com/people/77471294@N03/), on Flickr
Title: Re: BC DSM Engine bays...
Post by: Carl Gould on June 22, 2012, 07:42:04 pm: Edit: Updated as of November 14, 2012:

(http://i.imgur.com/dHl6q.jpg)
Title: Re: BC DSM Engine bays...
Post by: Zach Holt on July 16, 2012, 02:55:18 pm: (http://img140.imageshack.us/img140/7332/zachs940751378n.jpg) (http://imageshack.us/photo/my-images/140/zachs940751378n.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

theres a 4g64 with a g6 head a Galant bell with evo gears.
Title: Re: BC DSM Engine bays...
Post by: andrew volcz on July 16, 2012, 08:10:11 pm: about effin time Zach ! :D
Title: Re: BC DSM Engine bays...
Post by: Robert Vorley on July 16, 2012, 08:57:38 pm: Zach - Get some brackets on your rad before it snaps off and gets eaten by your turbo!!!!

Congrats on finally getting the engine in there, oh ya, it sounds awesome too!
Title: Re: BC DSM Engine bays...
Post by: Brett Haviland on July 16, 2012, 09:07:26 pm: /me so jealous!!! looks awesome buddy... i wanna see it run!
Title: Re: BC DSM Engine bays...
Post by: John Hartman on July 16, 2012, 10:40:43 pm: yea about time, looks good!
Title: Re: BC DSM Engine bays...
Post by: Bryan Hoytema on July 17, 2012, 11:13:53 am: With all these sick looking engine bays we'd deffinatly have a awesome turn out at revscene ! Lets put a good name to our DSMs this year!
Title: Re: BC DSM Engine bays...
Post by: Ryan Singh on July 10, 2013, 06:26:00 am: (http://img507.imageshack.us/img507/9871/yle0.jpg)
Title: Re: BC DSM Engine bays...
Post by: Jordan Kruger on July 10, 2013, 09:09:56 pm: Holy shit! You have the same Clear long block as me!
Title: Re: BC DSM Engine bays...
Post by: Bryan Hoytema on July 10, 2013, 09:46:55 pm: Same here ;) hahaha
Title: Re: BC DSM Engine bays...
Post by: Paul Pigar on July 11, 2013, 12:41:34 am: Here's mine
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/17767_10151312559680684_1600139084_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Ryan Singh on July 11, 2013, 08:53:00 am: Looking slick Paul.
Title: Re: BC DSM Engine bays...
Post by: Greg Durban on July 29, 2013, 11:51:00 pm: A work in progress.
(http://img407.imageshack.us/img407/9575/k6br.jpg)

She's a little rusty I know. >:( But she rallys. ;D
(http://img197.imageshack.us/img197/4221/xrn9.jpg)
(http://img15.imageshack.us/img15/9893/8wz3.jpg)
Title: Re: BC DSM Engine bays...
Post by: Paul Pigar on August 01, 2013, 10:37:22 pm: My updated engine bay before she blew her guts out... :'( :'( :'( :'( :'(
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/1005766_10151531221510684_656290997_n.jpg)
Title: Re: BC DSM Engine bays...
Post by: Yury Buryanau on August 02, 2013, 11:40:42 am: looks great, Paul
Title: Re: BC DSM Engine bays...
Post by: John King on October 30, 2014, 04:04:29 pm: (http://i36.photobucket.com/albums/e25/john_king6/talon/dsmenginebay_zps1432227e.jpg)[/URL]
Title: Re: BC DSM Engine bays...
Post by: Travis Koch on January 11, 2015, 01:03:39 am: My new power plant!

(http://i1123.photobucket.com/albums/l550/Traviskoch/Mobile%20Uploads/20150109_141158_zpsh5v8k3pj.jpg) (http://s1123.photobucket.com/user/Traviskoch/media/Mobile%20Uploads/20150109_141158_zpsh5v8k3pj.jpg.html)