« previous next »
Pages: 1 [2]

Author Topic: changin valve cover plans  (Read 1728 times)

Offline Michael Cummings

  • Hero Member
  • *****
  • Posts: 2667
changin valve cover plans
« Reply #15 on: December 15, 2003, 11:03:46 pm »
do it!
Logged
1992 Talon Tsi (Sold - Owned from 02-09)
1990 Chev Astro (RIP)
1988 Yamaha FZR250 (RIP)
2008 Kawi Ninja250R (daily rider)
1998 Ford Explorer XLT (daily driver)

Offline Eric McIntyre

  • Hero Member
  • *****
  • Posts: 1166
changin valve cover plans
« Reply #16 on: December 16, 2003, 07:51:28 pm »
well i'm lookin at a truck tomro
900 obo so its lookin pretty good!
wish me luck
little dilema tho...........
i know a guy whose sellin a mid 80's volvo 760 with a blown motor for 500 and another guy who is sellin a mid 80's lincoln for 500
so i take the 5.0 outta the lincoln and drop it into the volvo and sell it for 5000...........not to mention have some fun makin smoke shows before i sell it..........
then i take that money and go all out on the conversion!
soooooo tempting and the whole project would cost around 2000 including both cars!
Logged
1 laser rs....sold
the only way it was doin 12's in a quarter mile was being dropped off a 1320 foot  cliff
.....stupid university costing so much

Offline Michael Cummings

  • Hero Member
  • *****
  • Posts: 2667
changin valve cover plans
« Reply #17 on: December 16, 2003, 08:53:33 pm »
theres also a vw golf gti with performance cams and internals and shit got 10:1 compression...2.5 exhaust with header and muffler ...but the ignition is so f'ed cause it got jacked and then was recovered.....the interior is all f'ed from them rippin out the stereo....but they were stupid enough to leave the nice 5 star rims and new tread on it
so basically your gettin a body with a dope engine and wheels and tranny/clutch...everything else need replacing pretty much..but the guy only wants 800 bucks
alotta work but you could sell for alot more after its fixed
Logged
1992 Talon Tsi (Sold - Owned from 02-09)
1990 Chev Astro (RIP)
1988 Yamaha FZR250 (RIP)
2008 Kawi Ninja250R (daily rider)
1998 Ford Explorer XLT (daily driver)

Offline Eric McIntyre

  • Hero Member
  • *****
  • Posts: 1166
changin valve cover plans
« Reply #18 on: December 16, 2003, 10:42:28 pm »
intersting........... where abouts is this car?
what year?
man i like easy money :laugh:
Logged
1 laser rs....sold
the only way it was doin 12's in a quarter mile was being dropped off a 1320 foot  cliff
.....stupid university costing so much

Offline Michael Cummings

  • Hero Member
  • *****
  • Posts: 2667
changin valve cover plans
« Reply #19 on: December 17, 2003, 10:27:11 am »
its right near my house....needs a whole new ignition..like the part where you stick the key in..not under the hood, need new plugs and wires, battery, and interior panels but seats are all good...and then if theres anything else fucked up i have no idea..but the engine is nutty and its got rims ...and exhaust..pretty dece for 800...doesn't start though causea the ignition
Logged
1992 Talon Tsi (Sold - Owned from 02-09)
1990 Chev Astro (RIP)
1988 Yamaha FZR250 (RIP)
2008 Kawi Ninja250R (daily rider)
1998 Ford Explorer XLT (daily driver)

Offline Eric McIntyre

  • Hero Member
  • *****
  • Posts: 1166
changin valve cover plans
« Reply #20 on: December 17, 2003, 08:54:21 pm »
might hafta take a look at it........ try'n make alittle cash for the turbo swap
the truck turned out to be a pos!
o well gotta keep lookin
Logged
1 laser rs....sold
the only way it was doin 12's in a quarter mile was being dropped off a 1320 foot  cliff
.....stupid university costing so much

Offline Michael Cummings

  • Hero Member
  • *****
  • Posts: 2667
changin valve cover plans
« Reply #21 on: December 18, 2003, 12:44:49 pm »
i think its sold now
Logged
1992 Talon Tsi (Sold - Owned from 02-09)
1990 Chev Astro (RIP)
1988 Yamaha FZR250 (RIP)
2008 Kawi Ninja250R (daily rider)
1998 Ford Explorer XLT (daily driver)
Pages: 1 [2]
« previous next »