« previous next »
Pages: [1]

Author Topic: Quick release front bumper cover  (Read 3805 times)

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Quick release front bumper cover
« on: March 29, 2015, 10:04:13 pm »
I just installed my quick release kit from overkillfabrication.com Im super impressed with his design, best one ive seen, way better then the rubberband set up that i see everywhere. I dont like to buy things I could make myself but good for this guy to engineer this. I covered my side marker holes and the access point to the bolt behind the marker is non existant now.
Logged
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Robert Vorley

  • Hero Member
  • *****
  • Posts: 773
Re: Quick release front bumper cover
« Reply #1 on: March 30, 2015, 11:12:16 am »
Pics of installed product, feedback on ease of use?

I have been thinking of doing this for a few years now.  Sure would come in handy when it needs a tow.
Logged
1997 Eagle Talon AWD,
461 awhp, 357 tq @ 28 psi on RG's "heart-breaker" Mustang Dyno

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: Quick release front bumper cover
« Reply #2 on: March 30, 2015, 11:48:36 am »
Im not putting pics up on here (pain in the ass). Its fantastic trust me. The only concern I have is if the dazus fasteners locking or not... I havnt road tested yet. Im still waiting on parts from an old friend...
Logged
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Brett Haviland

  • Administrator
  • Hero Member
  • *****
  • Posts: 6530
Re: Quick release front bumper cover
« Reply #3 on: March 31, 2015, 11:40:03 am »
Here u go matt, got em off ur facebook post.



hoping to soon have money to upgrade to a newer forum style and allow upload space.  


Sounds like a good mod!
« Last Edit: March 31, 2015, 11:50:19 am by Brett Haviland »
Logged
I like Colts.  Turbo Colts.

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: Quick release front bumper cover
« Reply #4 on: March 31, 2015, 11:56:32 am »
Thanks buddy.
Logged
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Robert Vorley

  • Hero Member
  • *****
  • Posts: 773
Re: Quick release front bumper cover
« Reply #5 on: March 31, 2015, 04:45:23 pm »
Thanks.  I was thinking of using some kind of locking fastener.  Kind of a pita though.
Logged
1997 Eagle Talon AWD,
461 awhp, 357 tq @ 28 psi on RG's "heart-breaker" Mustang Dyno

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: Quick release front bumper cover
« Reply #6 on: April 01, 2015, 09:33:14 am »
There are rivets that hold the dazus fasteners in. I plan to paint bumper before I finalize the assembly.
Logged
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Allen fong

  • Sr. Member
  • ****
  • Posts: 440
  • Lying that my car fast since 1990
Re: Quick release front bumper cover
« Reply #7 on: May 08, 2015, 08:31:43 pm »
What's this kit worth?
Logged
1993 1G AWD

SOLD:1998 Talon AWD E316G @ 25 psi, EVO 8 ECU with, HKS 272/272 cams, Walbro 255 + rewire, ACT 2100 with street disk, 3" exhaust no cat, Aeromotive FP regulator, EVO 3 Throttle Body, EVO 3 intake mani, 1000cc inj, GM 3bar map, PR FMIC, Aem Truboost, Aem Wideband, Devils Own Meth on progressive controller.
Pages: [1]
« previous next »