Author Topic: 3rd Gear Pulls  (Read 2738 times)

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
3rd Gear Pulls
« on: February 19, 2013, 07:21:16 pm »
Stock 1g vs stock 2g both at 15psi. The flow up top of a 1g head and 14b turbo is incredible. Nice race Paul, next time we race between generations.
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Paul Pigar

  • Moderator
  • Hero Member
  • *****
  • Posts: 1479
Re: 3rd Gear Pulls
« Reply #1 on: February 19, 2013, 07:38:21 pm »
Good run buddy. Mine is fwd by the way and it's not stock.....its got a fart can, lol.
« Last Edit: February 19, 2013, 07:42:11 pm by Paul Pigar »
-98 talon tsi awd   -94 acura integra non-vtec
-96 talon tsi awd converted to eclipse gsx
-95 talon esi(sold)
-94 eclipse non-turbo(sold)
-91 talon tsi fwd(daily driver)
-90 nissan 300zx(sold)
-96 eclipse gs spyder
-98 eclipse spyder awd swap
-98 eclipse gs-t(traded)

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: 3rd Gear Pulls
« Reply #2 on: February 19, 2013, 10:38:59 pm »
Sorry I didn't think u needed to remind me of all the burn outs we did.
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Paul Pigar

  • Moderator
  • Hero Member
  • *****
  • Posts: 1479
Re: 3rd Gear Pulls
« Reply #3 on: February 20, 2013, 01:18:24 am »
-98 talon tsi awd   -94 acura integra non-vtec
-96 talon tsi awd converted to eclipse gsx
-95 talon esi(sold)
-94 eclipse non-turbo(sold)
-91 talon tsi fwd(daily driver)
-90 nissan 300zx(sold)
-96 eclipse gs spyder
-98 eclipse spyder awd swap
-98 eclipse gs-t(traded)

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: 3rd Gear Pulls
« Reply #4 on: February 20, 2013, 05:30:40 am »
Don't make me take the fart can off the race car.
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: 3rd Gear Pulls
« Reply #5 on: March 03, 2013, 12:07:21 am »
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Paul Pigar

  • Moderator
  • Hero Member
  • *****
  • Posts: 1479
Re: 3rd Gear Pulls
« Reply #6 on: March 03, 2013, 08:28:38 pm »
line 'em up again ;D ;D ;D ;D ;D ;D
-98 talon tsi awd   -94 acura integra non-vtec
-96 talon tsi awd converted to eclipse gsx
-95 talon esi(sold)
-94 eclipse non-turbo(sold)
-91 talon tsi fwd(daily driver)
-90 nissan 300zx(sold)
-96 eclipse gs spyder
-98 eclipse spyder awd swap
-98 eclipse gs-t(traded)

Offline kevin derhouson

  • Hero Member
  • *****
  • Posts: 1645
Re: 3rd Gear Pulls
« Reply #7 on: March 03, 2013, 08:33:07 pm »
« Last Edit: March 03, 2013, 08:35:15 pm by kevin derhouson »
She lives.
new build details ---> http://freetexthost.com/hgidu250ql
current awhp: 387

Offline John Hartman

  • Senior Member
  • Hero Member
  • *
  • Posts: 17539
Re: 3rd Gear Pulls
« Reply #8 on: March 05, 2013, 08:49:02 pm »
1g has better cams and definately a bigger turbo.
91 Eagle Talon TSi 5spd awd.  GT-12, TriFlow Cams, 850s, Tial, JIC, Jackal, sticky rubber.
86 Merkur XR4Ti 5spd, rwd, turbo, 91,381km.  Original paint, heated leather. intercooled, big VAM, Full 3" exhaust, Cossie sway bar, 16" tires.
06 Mazdaspeed6 6spd awd, DISI turbo, heated leather HIDs, Corksport, Cobb, Konig, Centric...
2018 VW Golf Alltrack turbo Tornado Red, 6mt, some free mods

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: 3rd Gear Pulls
« Reply #9 on: June 15, 2013, 10:08:52 am »
"Finish" your 2g. I will only let your spyder beat me once.
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Paul Pigar

  • Moderator
  • Hero Member
  • *****
  • Posts: 1479
Re: 3rd Gear Pulls
« Reply #10 on: June 15, 2013, 04:04:10 pm »
It's done, lol. Just need $$$ for tuning @ rg..... ;D ;D ;D ;D. It will be interesting to see
Fp hta68 against Fp big28. Both @ 30psi. So excited now.... ;D ;D ;D ;D.
-98 talon tsi awd   -94 acura integra non-vtec
-96 talon tsi awd converted to eclipse gsx
-95 talon esi(sold)
-94 eclipse non-turbo(sold)
-91 talon tsi fwd(daily driver)
-90 nissan 300zx(sold)
-96 eclipse gs spyder
-98 eclipse spyder awd swap
-98 eclipse gs-t(traded)

Offline John Hartman

  • Senior Member
  • Hero Member
  • *
  • Posts: 17539
Re: 3rd Gear Pulls
« Reply #11 on: June 16, 2013, 07:04:05 pm »
everything else being equal the 68hta is more turbo, but then,nothing is ever equal...
91 Eagle Talon TSi 5spd awd.  GT-12, TriFlow Cams, 850s, Tial, JIC, Jackal, sticky rubber.
86 Merkur XR4Ti 5spd, rwd, turbo, 91,381km.  Original paint, heated leather. intercooled, big VAM, Full 3" exhaust, Cossie sway bar, 16" tires.
06 Mazdaspeed6 6spd awd, DISI turbo, heated leather HIDs, Corksport, Cobb, Konig, Centric...
2018 VW Golf Alltrack turbo Tornado Red, 6mt, some free mods

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: 3rd Gear Pulls
« Reply #12 on: June 16, 2013, 07:11:35 pm »
That hta68 should blow me out the water.
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.

Offline Paul Pigar

  • Moderator
  • Hero Member
  • *****
  • Posts: 1479
Re: 3rd Gear Pulls
« Reply #13 on: June 17, 2013, 03:48:38 pm »
That hta68 should blow me out the water.
But you're a pro racer and i'm not...... ;D ;D ;D ;D
-98 talon tsi awd   -94 acura integra non-vtec
-96 talon tsi awd converted to eclipse gsx
-95 talon esi(sold)
-94 eclipse non-turbo(sold)
-91 talon tsi fwd(daily driver)
-90 nissan 300zx(sold)
-96 eclipse gs spyder
-98 eclipse spyder awd swap
-98 eclipse gs-t(traded)

Offline Matt Vangaalen

  • Sr. Member
  • ****
  • Posts: 403
  • VangaBuilt
Re: 3rd Gear Pulls
« Reply #14 on: June 17, 2013, 10:13:28 pm »
A pro wouldnt let a gst beat him or run low 12s in an 11 second car. Practise session this saturday.
6 bolt short block (.02 over evo9 pistons). Straight cut oil pump gears. Ported 2g head and manifolds, GSC S1 cams(adjustable gears), undercut SS valves, bronze guides, Manley springs. Fp's Big T28, stock 02 into 2.5 downpipe, 3" from the flex section back. Apex'i N1 muffler. ETS fmic. 1g bov. 1g throttle body. 255lph pump. 660cc injectors. AFPR. SD on Link V3. 345 ft lbs 345 hp.