British Columbia DSM
GVRD - BC DSM Club => Garage => Topic started by: Graeme H Burvill on January 04, 2010, 10:11:47 pm
-
been looking around trying to figure out how to get the little metal clips that are attached to the wire, out of this connector. Any ideas?
(http://i64.photobucket.com/albums/h161/Slug604/IMG_2590.jpg)
-
If you can't push the entire clip out of the plug from the back (clip and wire together), than....?
Use a small blade screwdriver to push the assembly from the back of the clip. Might work.
-
yea ive been picking away at it with a very small flat head. This clip is plastic though so i don't wanna mangle it too bad. Just wondering if anyone knew the technique.